Anki FSRS Review & Backlog Calculator
Drop a local .apkg or enter deck counts to forecast daily FSRS reviews, study minutes, exam risk and backlog clear time at 85%, 90% and 95% retention.
Updated November 20, 2026 · by the GuruOwl team
- .apkg up to 100 MB
- FSRS 85% / 90% / 95%
- Zero upload
FSRS Daily Review & Backlog Estimator
1-click exam presets (30 / 60 / 90 days)
- Avg daily load
- 223
- 55 new · 164 rev · 3 bl
- Daily time
- 49 min
- 42.5h total (52 days)
- Peak day (D57)
- 381
- ~1h 21m
- Backlog clear
- 10d
- +20/study day
Weekly daily-review trajectory
| FSRS Retention | Avg / Peak cards | Daily time | vs 90% |
|---|---|---|---|
| 85% | 188 / 398 | 42 min | -16% |
| 90% (default) | 223 / 381 | 49 min | Baseline |
| 95% | 343 / 724 | 1h 13m | +54% |
Clear your 180-card backlog with Guru Study Lock
Guru imports your .apkg decks free with FSRS-6 scheduling on iOS & Android — and Study Lock blocks distracting apps until your daily review goal is complete.
Anki FSRS workload calculator at a glance
GuruOwl reads your local .apkg or manual deck numbers in the browser, models daily new cards, FSRS reviews and overdue backlog catch-up until exam day, and compares time spent at 85%, 90% and 95% target retention.
- Two input modes
- Drop a local .apkg / .colpkg (auto-reads New, Learning, Young, Mature, Overdue and revlog pace) or enter numbers manually with exam presets.
- FSRS retention model
- Side-by-side workload comparison at 85%, 90% and 95% FSRS desired retention using the FSRS power-law forgetting curve.
- Exam presets
- One-click 30-, 60- and 90-day templates for MCAT, USMLE Step 1, NCLEX-RN and language vocabulary exams.
- Outputs
- Daily review breakdown (new + scheduled reviews + backlog clear), average and peak minutes, exam completion warning, and weekly trend.
- Privacy
- 100% browser-side (JSZip + fzstd + SQLite WASM). Your .apkg deck and study history never leave your device.
Drop a real .apkg deck to read its exact unseen, overdue and review-speed numbers — or load an MCAT, USMLE, NCLEX or language exam preset — to see your true daily review load, minutes per day, and whether you will finish before exam day.
Most students set a daily new-card cap without seeing the review wave that arrives two to four weeks later. A seemingly light 60 new cards per day at 95% FSRS retention can swell past 600 reviews a day right before a board exam, while an overdue backlog quietly stalls progress. Modelling the full window up front lets you tune new cards, catch-up horizon and FSRS desired retention before burnout hits.
How to forecast your Anki workload and clear a backlog
- 1Choose “Drop .apkg” to inspect a real Anki export (.apkg or .colpkg up to 100 MB, including zstd .anki21b), or stay in “Manual & presets” and tap MCAT, USMLE Step 1, NCLEX-RN or Language Exam to prefill realistic numbers.
- 2Set your remaining days until the exam, how many days per week you actually study, and how many days you want to spread overdue backlog clearing across (7–14 days prevents a single brutal catch-up day).
- 3Switch FSRS desired retention between 85%, 90% and 95% to see the exact trade-off between daily study minutes and expected cards remembered on exam day.
- 4Check the exam-readiness status: if cards remain unseen at your current daily cap, either raise new cards per day, trim low-yield tags, or lower desired retention from 95% to 90% (or 85%) to free up time.
- 5To actually stick to a heavy backlog recovery plan on your phone, import the .apkg into Guru (free FSRS-6 scheduling) and turn on Study Lock so distracting apps stay locked until your daily review target is done.
How FSRS desired retention (85% vs 90% vs 95%) changes daily time
Under FSRS (Free Spaced Repetition Scheduler), review intervals scale nonlinearly with desired retention along a power-law forgetting curve. Raising target retention from 90% to 95% cuts intervals by more than half — often nearly doubling daily review count for only five percentage points of recall.
Conversely, stepping from 90% down to 85% stretches intervals by roughly 1.6x, trimming daily review volume by around a third while still keeping the vast majority of high-yield facts active. That makes 85%–90% the practical sweet spot whenever you are digging out of an overdue backlog or sprinting through a large deck.
| Desired retention | Relative review load | Best fit |
|---|---|---|
| 85% FSRS | ~30–40% fewer reviews vs 90% | Large language decks, heavy overdue backlogs, or time-capped semesters where finishing all new cards matters most. |
| 90% FSRS (default) | Baseline (1.0x) | Best balance of long-term recall and daily minutes for MCAT, USMLE Step 1, NCLEX and multi-month courses. |
| 95% FSRS | ~1.7–2.1x more reviews vs 90% | Small, ultra-high-yield subdecks (equations, drug contraindications, weak-topic tags) during the final 2–3 weeks. |
Exam-prep pacing benchmarks (30, 60 and 90 days)
- MCAT (60 days): A 3,000-card core deck at 55 new/day (6 study days/week) finishes new cards with roughly a week to spare and typically peaks around 50–75 minutes/day at 90% FSRS.
- USMLE Step 1 (90 days): Unsuspending 7,200 remaining cards at 90 new/day takes steady 7-day discipline. Clearing a 450-card overdue backlog over 14 days adds ~33 catch-up cards/day rather than derailing new-card progress.
- NCLEX-RN (30 days): Short sprints leave little room for high retention spikes. Keep desired retention near 90% (or 85% if juggling clinical shifts) and front-load weak systems early.
- Language exams — JLPT, DELE, HSK (60 days): Vocabulary cards are fast (~6–8 seconds each), so 85% FSRS lets you absorb 2,000+ words in under 25–35 minutes per day with extra time left for listening and reading.
A practical rule for clearing an Anki backlog without quitting
Seeing 500 or 1,500 overdue cards in Anki triggers avoidance, which makes the backlog grow another day. Instead of trying to zero out every overdue card in one marathon sitting, cap new cards temporarily (or keep them modest), split the backlog across 7 to 14 days, and protect one non-negotiable review block each morning.
That consistency problem is why Guru pairs free FSRS-6 scheduling with Study Lock on iOS and Android: you set your daily review goal, and distracting social or video apps stay blocked until you finish your cards. Once the backlog hits zero, daily review time drops sharply.
How .apkg inspection works privately in your browser
When you drop an .apkg or .colpkg file, this page unzips it with JSZip, decompresses .anki21b zstd collections with fzstd if needed, and queries the SQLite cards and revlog tables locally with WebAssembly. Suspended cards are separated from active cards, overdue cards are counted against your collection creation date, and average seconds per card are computed from your real review log — without uploading a single byte.
Shared decks exported without scheduling history show 100% New cards and zero overdue backlog; you can still plug in any custom backlog manually. Limits match our APKG Viewer: 100 MB package max, 64 MB decompressed database max.
Frequently asked questions
How accurate is an FSRS review workload estimate?
This calculator simulates daily cohorts using the FSRS power-law forgetting curve, stability growth and expected lapse rate (1 − R), plus your own revlog pace if you drop an .apkg. Real daily counts still fluctuate with card difficulty, leeches and rating habits (Hard/Easy), so treat the output as a realistic planning band rather than an exact single-day guarantee.
Can I drop an Anki .apkg exported with scheduling history?
Yes. Export your deck from Anki Desktop with “Include scheduling information” checked (or drop a .colpkg backup up to 100 MB). The tool reads New, Learning, Young, Mature, Overdue and Suspended counts plus your average seconds per card directly from the SQLite database in your browser.
Why does a shared .apkg show 0 overdue cards?
Most public shared decks are exported without scheduling data, so every card starts in the New queue (type 0). The calculator automatically fills your total unseen card count from the deck and lets you model daily new cards, exam countdown and retention from day one.
Should I lower FSRS desired retention to 85% to clear a backlog?
Lowering FSRS desired retention from 90% to 85% (or from 95% to 90%) is one of the fastest ways to cut daily review minutes by 30%–45% without deleting cards. Use the side-by-side retention comparison table above to see exact minutes saved on your own deck.
How does Guru Study Lock help clear an Anki backlog?
Guru imports your standard .apkg decks for free with FSRS-6 scheduling on iOS and Android, and adds Study Lock — which blocks distracting apps until you finish your daily card target so overdue backlogs do not pile back up.
Is this affiliated with Anki?
No. GuruOwl is an independent tool and is not affiliated with Anki, AnkiMobile, AnkiDroid or AnkiWeb. “Anki” here only describes the file format it reads and writes.
Review your Anki decks on iPhone or Android
Import .apkg and .colpkg decks for free. Daily review is free, too.
Editing and cross-device sync require Pro.